logo
Teklif isteği |
Ana sayfa Ürünlersilikon karbid seramik

SNSiC Kiln Beams with 1600 °C Max Working Temperature for High-Temperature Structural Integrity in Ceramics Firing

Tüm ürünler

silikon karbid seramik

(27)

Reaksiyon Bağlı Silikon Karbid

(12)

Isıtma Elemanları

(56)

Silisyum nitrür seramik

(9)

Alüminyum Oksit Seramik

(38)

Zirkonya oksit seramik

(2)

Bor Nitrür Seramik

(4)

Seramik tozu

(5)
Sertifika
Çin Shaanxi KeGu New Material Technology Co., Ltd Sertifikalar
Çin Shaanxi KeGu New Material Technology Co., Ltd Sertifikalar
Müşteri yorumları
NGK, Shaanxi Kegu ile uzun süredir süren ortaklığımıza değer veriyor. Onların SSiC seramikleri kalite ve yenilikçiliğiyle öne çıkıyor, karşılıklı başarımızı yönlendiriyor.

—— NGK Thermal Technology Co., Ltd.

Huike'de, Shaanxi Kegu Yeni Malzeme Teknolojisi Şirketi'yle uzun süredir süren ortaklığımızla gurur duyuyoruz. Güven, yenilik ve ortak mükemmellik üzerine kurulan bir işbirliği.SSiC seramiklerinde uzmanlıkları ve güvenilir çözümleri projelerimizi sürekli destekledi.

—— Suzhou Huike Technology Co., Ltd.

Keda olarak, Shaanxi Kegu Yeni Malzeme Teknolojisi A.Ş. ile uzun süredir devam eden ortaklığımızı büyük bir memnuniyetle karşılıyoruz. Yüksek kaliteli SSiC seramik çözümleri projelerimizin ayrılmaz bir parçası olmuştur ve devam eden işbirliğimiz ve ortak başarımız için sabırsızlanıyoruz.

—— Keda Endüstri Grubu A.Ş.

Ben sohbet şimdi

SNSiC Kiln Beams with 1600 °C Max Working Temperature for High-Temperature Structural Integrity in Ceramics Firing

SNSiC Kiln Beams with 1600 °C Max Working Temperature for High-Temperature Structural Integrity in Ceramics Firing
SNSiC Kiln Beams with 1600 °C Max Working Temperature for High-Temperature Structural Integrity in Ceramics Firing SNSiC Kiln Beams with 1600 °C Max Working Temperature for High-Temperature Structural Integrity in Ceramics Firing SNSiC Kiln Beams with 1600 °C Max Working Temperature for High-Temperature Structural Integrity in Ceramics Firing

Büyük resim :  SNSiC Kiln Beams with 1600 °C Max Working Temperature for High-Temperature Structural Integrity in Ceramics Firing

Ürün ayrıntıları:
İletişim

SNSiC Kiln Beams with 1600 °C Max Working Temperature for High-Temperature Structural Integrity in Ceramics Firing

Açıklama
Vurgulamak:

1600 °C Max Working Temperature SNSiC Kiln Beams

,

High-Temperature SNSiC Kiln Beams

,

Structural Integrity Silicon Carbide Beams

SNSiC Kiln Beams & Supports: High-Temperature Structural Solutions for Ceramics & Sanitaryware
Product Description
SNSiC (Sintered Silicon Carbide) Beams and Supports are engineered to deliver maximum structural integrity and performance in the most demanding high-temperature kiln environments. Designed specifically for advanced kiln furniture systems firing dinnerware, porcelain, and sanitaryware, our beams offer a superior combination of lightweight design, exceptional strength, and long-term durability. Customizable in cross-section, wall thickness, and length to your exact tolerances, they are the optimal choice for improving kiln efficiency and product quality.
Why Choose SNSiC Over Other Silicon Carbides?
While various silicon carbide materials exist, Sintered SiC (SSiC/SNSiC) stands out for high-performance kiln applications. The table below compares SNSiC's key properties with other common types, highlighting its advantages for structural kiln furniture.
Comparison of Silicon Carbide Types for Kiln Furniture
Material Type Max Working Temperature Key Properties Best Suited for Kiln Furniture?
Sintered SiC (SNSiC/SSiC) Up to 1600 °C High Strength, Excellent Corrosion & Oxidation Resistance, Low Porosity ✅ YES - Ideal for high-load, long-life beams and supports
Recrystallized SiC (RSiC) Up to 1600°C High Thermal Shock Resistance, Porous Structure ⚠️ LIMITED - Excellent for tiles, but lower strength than SNSiC for heavy beams
Nitride-Bonded SiC (NSiC) Up to 1450°C Good Oxidation Resistance, Cost-Effective ⚠️ LIMITED - Lower temperature ceiling and strength than SNSiC
Silicon-Infiltrated SiC (SiSiC) Up to 1350°C High Thermal Shock Resistance ❌ NO - Lower maximum temperature limit
Key Material Properties of SNSiC Beams & Supports
Property Unit Value (SNSiC) Benefit for Your Kiln
Main Composition % >99% SiC Ensures purity and superior high-temperature performance
Bulk Density g/cm³ 3.0 - 3.1 High density translates to exceptional mechanical strength and load capacity
Porosity Vol-% < 5% Extremely low porosity prevents gas infiltration, enhancing oxidation resistance and longevity
Flexural Strength MPa 370 - 420 Outstanding resistance to bending and fracture under heavy loads at temperature
Thermal Conductivity W/(m*K) ~125 Promotes rapid, even heat distribution, reducing firing times and improving energy efficiency
Max Use Temperature °C 1600 Future-proofs your kiln for a wide range of ceramics and firing schedules
Key Features & Benefits
  • Maximize Kiln Capacity & Efficiency
    • High Strength-to-Mass Ratio: Our SNSiC beams sustain very high loading weights with less mass, allowing you to stack ware higher and denser, significantly improving kiln throughput.
    • Superior Thermal Conductivity: Facilitates faster heating and cooling cycles, slashing energy consumption and increasing overall production efficiency.
  • Unmatched Durability & Long-Term Performance
    • Excellent Creep Resistance: Guarantees permanent flatness retention and structural integrity over thousands of firing cycles, eliminating warping and ensuring consistent product quality.
    • Superior Oxidation & Corrosion Resistance: Withstands aggressive kiln atmospheres, preventing surface degradation and extending service life far beyond that of alternative materials.
    • Exceptional Thermal Shock Resistance: Performs flawlessly under rapid temperature changes, minimizing the risk of cracking or failure during aggressive firing schedules.
Applications
  • Structural Beams and Supports for Tunnel Kilns and Periodic Kilns
  • Firing of Technical Ceramics, Sanitaryware, Porcelain, and Fine Dinnerware
  • High-Temperature Sintering and Heat Treatment Processes
Request Your Custom Quote
Optimize your kiln furniture with beams designed for performance and longevity. Contact us today to discuss your specific requirements for cross-sections, lengths, and tolerances. Our engineering team is ready to provide a solution that boosts your productivity and reduces your total cost of ownership.

Etiket:

SİLİKON KARBÜR SERAMİKLER,

Basınçsız Sinterlenmiş SIC,

Sic Seramik

İletişim bilgileri
Shaanxi KeGu New Material Technology Co., Ltd

İlgili kişi: Ms. Yuki

Tel: 8615517781293

Sorgunuzu doğrudan bize gönderin (0 / 3000)

Hakkında

silikon karbid seramik

Hafif basınçsız sinterli SIC çatal yüksek sıcaklığa dayanıklı

Özel Basınçsız Sintered SiC Roleri 1650°C Sıcaklığa Dirençli Rol Fırınları için

Reaksiyon Bağlı Silikon Karbid

Reaksiyon Sinterli Silikon Karbid Hava Soğutma Tüpü Endüstriyel Soğutma

Gaz ve Yakıt Endüstriyel Fırın Yakıcılar İnşaat Seramikleri

Mesaj bırak

Gizlilik Politikası | Çin iyi Kalite silikon karbid seramik tedarikçi. © 2025 Shaanxi KeGu New Material Technology Co., Ltd. All Rights Reserved.