|
تفاصيل المنتج:
|
| Density: | >3.05g/cm3 | Flexural Strength: | 380MPa |
|---|---|---|---|
| Material: | SiC | Composition:SiC: | >98% |
| Color: | Black | Max. Service Temp: | 1650°C |
This product is a thick-wall pressureless sintered silicon carbide (SiC) roller, designed to exceed conventional wall thickness limits (typically 6–8mm) with two standardized specifications:
The thick-wall design (10–12.5mm) significantly improves structural integrity, ensuring sustained load-bearing capacity under severe corrosion, high-temperature scouring, or mechanical wear. Ideal for photovoltaic glass kilns, lithium battery material sintering furnaces, and ceramic roller kilns.
1. Enhanced Safety via Thick-Wall Structure
2. Pressureless Sintering for Superior Performance
3. Thermal Shock & Wear Resistance
4. Custom Validation & Support
1. Balanced Safety & Efficiency
2. Cost Efficiency
3. Rapid Validation & Delivery
| Physical properties | Unit | SSiC | |
| Composition:SiC | Vol% | ≥98 | |
| Density 20 ℃ | g/cm3 | ≥3.06 | |
| Open Porosity | Vol% | ≈0 | |
| Hardness | Rockwell Hardness 45N | R45N | 93 |
| Vickers Hardness HV1 | kg/mm2 | 2350 | |
| hermal Conductivity | 20°C | Wm-1K-1 | 196 |
| 1200°C | Wm-1K-1 | 60 | |
| Coficient of Thermal Expansion | 10-6K-1 | 4.0 | |
| Flexural Strength | 20°C | MPa | 320-400 |
| 1300°C | MPa | 300-400 | |
| Modulus of Elasticity @ RT | GPa | 410 | |
| Thermal shock resistance | ℃ | ＞350 | |
| Max. Service Temp (air) | ℃ | 1650 | |
The maximum diameter achievable through extrusion molding is 90mm, with a maximum thickness of 15mm and a maximum length of up to 4 meters
اتصل شخص: Ms. Yuki
الهاتف :: 8615517781293
