Silicon carbide (SiC), particularly pressureless sintered silicon carbide (SSiC), is widely recognized for its outstanding corrosion resistance in aggressive chemical environments.
This article presents data-based performance results and explains why SSiC is one of the most reliable materials for chemical processing applications.
Test Method
To evaluate chemical resistance, immersion testing was conducted under controlled conditions.
Test conditions:
- Method: Immersion test with agitation
- Duration: 125–300 hours
- Measurement: Corrosion rate (mg/cm²·yr)
This method simulates long-term exposure in real industrial environments.
Acid Resistance Data
SSiC demonstrates excellent stability in strong acids:
| Chemical |
Temperature |
Corrosion Rate (mg/cm²·yr) |
| 98% H₂SO₄ |
100°C |
1.8 |
| 85% H₃PO₄ |
100°C |
<0.2 |
| 70% HNO₃ |
100°C |
<0.2 |
| 25% HCl |
70°C |
<0.2 |
Evaluation Standard:
- < 2 mg/cm²·yr → Suitable for long-term use
- Indicates extremely low material degradation
Alkali Resistance Data
Performance in alkaline environments remains strong:
| Chemical |
Temperature |
Corrosion Rate (mg/cm²·yr) |
| 50% NaOH |
100°C |
2.5 |
| 45% KOH |
100°C |
<0.2 |
SSiC maintains structural integrity even under high-temperature alkaline exposure.
Why Silicon Carbide is Corrosion Resistant
The superior corrosion resistance of SSiC is driven by its microstructure:
- High purity (SiC ≥ 98.5%)
- No free silicon phase
- Near-zero open porosity
Result:
- Corrosive media cannot penetrate the material
- No weak phases exist for chemical attack
This dense and stable structure ensures long-term durability in aggressive environments.
Comparison with Other Materials
| Material |
Corrosion Behavior |
| SSiC |
Very low corrosion |
| RB-SiC |
Higher corrosion in acids |
| Alumina (Al₂O₃) |
Partial failure in some acids |
| Tungsten Carbide |
Rapid corrosion in acids |
Compared to alternative materials, SSiC provides more stable and predictable performance.
Industrial Applications
Due to its chemical stability, SSiC is widely used in:
- Chemical pumps and seal systems
- Heat exchangers
- Reactor linings
- Semiconductor wet processing equipment
These applications require materials that can withstand continuous exposure to corrosive media without performance degradation.
Conclusion
Data shows that pressureless sintered silicon carbide (SSiC) offers exceptional corrosion resistance across a wide range of acids and alkalis.
With corrosion rates typically below 2 mg/cm²·yr, SSiC is well-suited for long-term industrial use, particularly in harsh chemical environments.
Looking for Corrosion-Resistant SiC Components?
SSiC parts can be manufactured for demanding applications requiring:
- High chemical resistance
- Structural stability
- Long service life
Providing your operating conditions (chemical type, temperature, concentration) helps identify the most suitable solution.
Your message must be between 20-3,000 characters!
English
