company news about Industrial Demand Drives Broader Adoption of Silicon Carbide Ceramic Parts in High-Performance Applications

XI’AN, China — With increasing requirements for materials capable of operating under high temperature, corrosive, and mechanically demanding conditions, silicon carbide ceramic components—particularly pressureless sintered silicon carbide (SSiC)—are seeing broader adoption across multiple industrial sectors.

According to industry observations, SSiC materials are being applied in semiconductor processing, chemical systems, and thermal equipment where performance stability is critical.

Expanding Use in Semiconductor and Thermal Systems

In semiconductor manufacturing, silicon carbide components such as wafer carriers, process tubes, and heating elements are used in environments exceeding 1200°C.

Material characteristics including a low coefficient of thermal expansion (~4.0 ×10⁻⁶ /K) and high thermal conductivity (~116 W/m·K) support dimensional stability during thermal cycling.

Similarly, in furnace and thermal processing applications, SSiC components are used as kiln furniture, setter plates, and structural supports. With a maximum service temperature of up to 1650°C in air and thermal shock resistance exceeding ΔT 350°C, the material is suited for repeated heating and cooling conditions.

Performance in Corrosive Chemical Environments

In chemical processing systems, silicon carbide components are commonly used for seal rings, pump parts, and corrosion-resistant linings.

Test data under controlled conditions (125–300 hours of immersion with agitation) indicate:

• Corrosion rate of approximately 1.8 mg/cm²·yr in 98% H₂SO₄ at 100°C
• Corrosion rate of approximately 2.5 mg/cm²·yr in 50% NaOH at 100°C

These values are generally considered within the range suitable for long-term industrial use, depending on system design and operating conditions.

Mechanical and Wear-Resistant Applications

Beyond thermal and chemical environments, silicon carbide ceramics are also used in wear-critical applications such as bushings, seal faces, and structural components.

Typical properties include hardness of approximately 93 HRA and a modulus of elasticity of around 410 GPa, supporting resistance to deformation and wear under mechanical load.

Manufacturing Considerations

SSiC components are produced through pressureless sintering processes exceeding 2100°C, followed by precision machining.

Reported manufacturing capabilities include:

• Dimensional tolerance up to ±0.02 mm
• Surface roughness up to Ra ≤ 0.8 μm
• Capability to produce complex geometries

Such parameters are relevant for applications requiring tight tolerances and consistent assembly performance.

Industry Outlook

As industrial systems continue to demand higher reliability under extreme operating conditions, materials such as SSiC are expected to play an increasing role in equipment design.

Applications involving high temperature, corrosive media, and mechanical wear are likely to remain key drivers for the adoption of silicon carbide ceramic components.